温州附近想过夜电话联系

Pengrui instruments, focus Tensile testing machine
 Tensile testing machine
 phone
Current position: home page > Industry News > Universal testing machine
Product catalog
Private service controlled tensile testing machine
Universal testing machine
Single column tensile testing machine
Double column tensile testing machine
Horizontal tensile testing machine
Door type tensile testing machine
Electronic tensile testing machine
High and low temperature tensile testing machine
 I buy logo of instrument network
hot-sale product
Development of universal tensile testing machine in China
Classification of tensile testing machines according to the characteristics of loading
Introduction of electro hydraulic universal testing machine
Why does the tensile testing machine stop when it is loaded to the maximum force?
Introduction of universal tensile testing machine
Design of compression fixture for tensile testing machine
Selection of tensile testing machine
Verification method of tensile testing machine
Technical articles
Notes on the maintenance of the machine and the test method of tensile force
Why is tensile testing machine calibrated once a year?
What is the working principle and executive standard of tensile testing machine
Installation, use and maintenance of tensile testing machine
Causes of sample slipping of electronic tensile machine
Corresponding test links of tensile testing machine
The best condition of tension machine experiment
Basic principle and technical performance of tensile testing machine

Site environment selection required by installation specification of microcomputer controlled electronic universal testing machine

Source: Tensile testing machine October 12, 2018 Keywords:

Microcomputer control Electronic universal testing machine Site environment selection required by installation specification
  
Installation requirements of microcomputer controlled electronic universal testing machine
  
1. Relative humidity ≤ 80% in the range of room temperature 100C ~ 350C;
  
2. Horizontal installation on a stable foundation with levelness of 0.2/1000;
  
3. In the environment without vibration, corrosive medium and strong electromagnetic interference.
  
The range of the rated voltage should not exceed 4%;
  
5. The distance between the two sides of the equipment and the wall should not be less than 0.8m, which is convenient for future maintenance.
  
If your computer-controlled electronic universal testing machine has been verified and the verification is invalid after transportation, it is required to be re verified.
  
1. Installation site
  
Ensure that the installation and placement conditions meet the requirements of the national "installation specification".
  
2. Installation environment
  
Ensure that the installation environment conforms to the national "installation specification".
  
3. Power supply
  
Ensure that the power supply conditions meet the national "installation specification" description.
  
4. Specification
  
1) lift the testing machine with belt and lifting machine more than twice the load capacity;
  
2) when using forklift to lift the machine, try to keep balance and lift the testing machine carefully.
  
3) when using the belt to raise the testing machine, make sure that the body does not tilt. If the testing machine is tilted, the belt will slide and the testing machine will hurt workers.
  
4) do not use the test set-top board to raise the machine, causing injury to the machine and workers.
  
5. Preparation for transportation
  
1) turn off the power.
  
2) remove the power cable from the machine.
  
Transportation
Home page of tensile testing machine | Tensile testing machine | Industry information
Main business: Electronic tensile testing machine Horizontal tensile test Metal tensile testing machine Rubber tensile testing machine Spring tension testing machine All kinds of tensile testing machine
Tensile testing machine Pengrui instrument
Pengrui instrument( anastasia-duck.com )Copyright jinicp no.08002309